A header line shows the storage name together with the selected standard.
The table is organized in accordance with the selected Standard in a kind of folder system where the Source, Receiving, Background Noise and Reverberation time measurements represent the folders. In addition, the calculated ratings are found in the rows below the main folders.
The main measurement folders are labeled with their names and contain in brackets the number of accepted microphone positions.
The main folders may be followed by extra lines showing the different source positions (#A...#D) and their number of accepted microphone positions.
The rating folders at the end of the table are labled with their names and contain the calculated single number index
Each folder may have a warning indicator at the end of the line.
Project Warnings
Use the cursor keys or tap on the folder of interest to select this line.
Press and hold anywhere on the table to bring up the context menu or press the large ü button
Exclue: Exclude the selected measurement from the average calculation.
Include: Include a previously excluded measurement into the average calculation.
Delete: Delete the selected measurement from the project.
Press to evaluate the details of the measured or calculated data
Press to show info about the current measurement or about the selected warning indicator
Project Warnings
Tap to switch to the Measure (idle) view mode.
This is the mode where the where measurements are taken.
Tap to see each microphone position and each sub-rating in the table.
Tap to reduce the table to its main folders and ratings.
Tap to import measurement data from the storage. Folders to import can be individually selected.
This button gives access to the memory menu.
- If the current project is not saved, you will be prompted to save the project with a new name.
- If the measurement is already saved, or no measurement is open, you will have a list of projects to select from.
To begin a new project, please press the key on the keyboard.